● Tips for improving the flow range of the fuel level sensor by 1/4 [12] 1. Compensated bias: The negative current of the fuel metering sensor must be less than 1/8] 1. The installation position of the sensor should avoid places with loud noise as much as possible, such as market interference, unstable outlet flow range, etc. [12] 2. At least 10 elbows or elbows upstream of the sensor.
Manufacturing strictly in accordance with ISO9001:2000, 2000 or BS 3 standards;
sensor and engine valve system, including other sensor that support flow (such as PHEV, PHEV), and new throttle blowing devices;
The throttle body sleeve design provides a waterproof and dustproof structure, with a flow stabilizing device and temperature sensor as auxiliary devices for the device;
Intake pressure sensor (wind direction/speed): It is one of the important reference signals for regulating the efficiency of the air compressor, and the intake pressure follows the instruction table. Generally, the intake pressure is 3-10m;
Intake pressure sensor (wind direction and pressure): capable of reliably measuring atmospheric pressure changes within the range of 50-100Kpa.
Tire pressure sensor (analog α ): Technical parameters: ◆ Bridge resistance:~00050 Ω/25C~500KKC ◆ Through current, voltage, inductance.
·Intake pressure sensor (analog α ): It is one of the reference signals for detecting changes in atmospheric pressure, and the sensor (analog α ) The ratio output signal to the linear output of atmospheric pressure is between 04M and 5M.
·Multiple connection methods: joint connection, compact appearance, fast and easy, and economical temperature environment.
High precision: △ C=(-00126)/△>5 ° C.
High sensitivity: at 01mm/100mm/150mm/200mm.
● Wide operating temperature range. 20 ° C~+50 ° C- 20 ° C to+80 ° C.
Measurement error: ≤ ± 01% ± 005%/° C; ± 02%/° C 000 ± 04 ° C ± 05 ° C.
Generally used in situations where liquid level monitoring of closed containers is required. For example, when measuring liquid level, it is necessary to measure the material.
There are three types of liquid level sensor: ≥ 450, LLD - ≥ 230, and LLD - ≥ 480,
Top mounted magnetic flap level gauge (PP/PTFE) is suitable for measuring liquid levels in various containers that are not easy to install level gauge on the side, especially in underground storage tanks, tanks, pools, and gas gathering areas. Together with the density of the medium, it is called residual oil.
● Tips for improving the flow range of the fuel level sensor by 1/4 [12] 1. Compensated bias: The negative current of the fuel metering sensor must be less than 1/8] 1. The installation position of the sensor should avoid places with loud noise as much as possible, such as market interference, unstable outlet flow range, etc. [12] 2. At least 10 elbows or elbows upstream of the sensor.
Manufacturing strictly in accordance with ISO9001:2000, 2000 or BS 3 standards;
sensor and engine valve system, including other sensor that support flow (such as PHEV, PHEV), and new throttle blowing devices;
The throttle body sleeve design provides a waterproof and dustproof structure, with a flow stabilizing device and temperature sensor as auxiliary devices for the device;
Intake pressure sensor (wind direction/speed): It is one of the important reference signals for regulating the efficiency of the air compressor, and the intake pressure follows the instruction table. Generally, the intake pressure is 3-10m;
Intake pressure sensor (wind direction and pressure): capable of reliably measuring atmospheric pressure changes within the range of 50-100Kpa.
Tire pressure sensor (analog α ): Technical parameters: ◆ Bridge resistance:~00050 Ω/25C~500KKC ◆ Through current, voltage, inductance.
·Intake pressure sensor (analog α ): It is one of the reference signals for detecting changes in atmospheric pressure, and the sensor (analog α ) The ratio output signal to the linear output of atmospheric pressure is between 04M and 5M.
·Multiple connection methods: joint connection, compact appearance, fast and easy, and economical temperature environment.
High precision: △ C=(-00126)/△>5 ° C.
High sensitivity: at 01mm/100mm/150mm/200mm.
● Wide operating temperature range. 20 ° C~+50 ° C- 20 ° C to+80 ° C.
Measurement error: ≤ ± 01% ± 005%/° C; ± 02%/° C 000 ± 04 ° C ± 05 ° C.
Generally used in situations where liquid level monitoring of closed containers is required. For example, when measuring liquid level, it is necessary to measure the material.
There are three types of liquid level sensor: ≥ 450, LLD - ≥ 230, and LLD - ≥ 480,
Top mounted magnetic flap level gauge (PP/PTFE) is suitable for measuring liquid levels in various containers that are not easy to install level gauge on the side, especially in underground storage tanks, tanks, pools, and gas gathering areas. Together with the density of the medium, it is called residual oil.