In addition to commonly used ones, you also need to understand these temperature transmitter.
The multi-channel signal generator/calibrator is mainly used for testing the signal source characteristics of signal types, signal source types, or industrial standard signal sources. The full function measurement of the signal source, touch buttons, various on/off tests of the signal source, and display tests are almost all transformed into multi-channel signal sources
The launch of this instrument has greatly improved the service life of the convective heat exchange controller, extended the service life of the instrument panel and case, and provided reliable guarantees for the accurate implementation of the instrument with good stability and better operability.
Multi channel signal generator/calibrator, supporting multiple signal source standards, can compare and analyze the calibration and test value comparison results of multiple signal sources, making it easy to integrate into national standards.
The scanning range of this instrument is wide, and it can achieve synchronous measurement of four CD vector values. It can accurately display the scanning values of the scanned workpiece and generate programmable measurement output errors. The single frequency scanning signal source error is within 02%, with a temperature range of -10~65C, and has a high scanning value.
Separate installation of host and sensor, DIN type right angle outlet and horizontal separation device, on-site operable host, displacement sensor, linear sensor, digital display block component
Press the power button, then set the parameters. After saving the parameters, you can enter the measurement state.
In the measurement state, press the "RUN" button once, and the instrument's measurement data will automatically calculate the vertical displacement of the initial baffle in the proportional relationship.
In the measurement state, press the "EEL" button, the instrument's measurement data will automatically press the "SET" button once, and then the measurement will end. The corresponding digital quantity will also appear, indicating the current value.
RSU=R-H (Scale A/D) (1) RS=T (SET)/K (SOL) R=2 (2).
R-T=100 Ω (2) R-NC (SOL-203.
II 200-700 μ M (100-1000 μ M (1 μ M (2.
RT 200-2000 μ M (NPT) μ M (NPT 1/1000) μ M (NPT 1/1200.
In addition to commonly used ones, you also need to understand these temperature transmitter.
The multi-channel signal generator/calibrator is mainly used for testing the signal source characteristics of signal types, signal source types, or industrial standard signal sources. The full function measurement of the signal source, touch buttons, various on/off tests of the signal source, and display tests are almost all transformed into multi-channel signal sources
The launch of this instrument has greatly improved the service life of the convective heat exchange controller, extended the service life of the instrument panel and case, and provided reliable guarantees for the accurate implementation of the instrument with good stability and better operability.
Multi channel signal generator/calibrator, supporting multiple signal source standards, can compare and analyze the calibration and test value comparison results of multiple signal sources, making it easy to integrate into national standards.
The scanning range of this instrument is wide, and it can achieve synchronous measurement of four CD vector values. It can accurately display the scanning values of the scanned workpiece and generate programmable measurement output errors. The single frequency scanning signal source error is within 02%, with a temperature range of -10~65C, and has a high scanning value.
Separate installation of host and sensor, DIN type right angle outlet and horizontal separation device, on-site operable host, displacement sensor, linear sensor, digital display block component
Press the power button, then set the parameters. After saving the parameters, you can enter the measurement state.
In the measurement state, press the "RUN" button once, and the instrument's measurement data will automatically calculate the vertical displacement of the initial baffle in the proportional relationship.
In the measurement state, press the "EEL" button, the instrument's measurement data will automatically press the "SET" button once, and then the measurement will end. The corresponding digital quantity will also appear, indicating the current value.
RSU=R-H (Scale A/D) (1) RS=T (SET)/K (SOL) R=2 (2).
R-T=100 Ω (2) R-NC (SOL-203.
II 200-700 μ M (100-1000 μ M (1 μ M (2.
RT 200-2000 μ M (NPT) μ M (NPT 1/1000) μ M (NPT 1/1200.
